All guides

How to pre-grade a Pokémon card at home

Updated November 16, 2026

Pre-grading means checking a raw card the way a grader would before you pay to submit it. Graders look at four things: centering, corners, edges and surface. Ten minutes with good light tells you most of what you need.

What you need

1. Centering

Compare the left border with the right and the top with the bottom, on the front and on the back. Centering is written as a ratio such as 55/45: the wider border's share against the narrower one's. The closer to 50/50, the better. Each grading company publishes how far off a card can be at each grade, and the front is held to a tighter standard than the back.

2. Corners

Look at all four corners on both sides under magnification. You want sharp points with no whitening, fraying or rounding. One soft corner can be the difference between a 10 and a 9.

3. Edges

Run your eye along each edge, front and back. Look for white specks, chipping and rough cuts. Whitening often shows first on the back.

4. Surface

Tilt the card under the light and look for scratches, print lines, dents, stains and fingerprints on both sides. Holo and foil areas show scratches most. Surface flaws are the easiest to miss in a quick look.

Get a second opinion from the AI pre-grade

After your own check, take two photos, front and back. Our AI-powered pre-grade reviews centering, corners, edges and surface on each side and returns an estimated grade range for PSA and TAG, usually in about 60 seconds.

Eligible estimates are backed by our grade guarantee.

Photo tips

Common Questions

What does pre-grading a card mean?

Estimating the grade a raw card is likely to receive before you pay to have it graded, by checking centering, corners, edges and surface.

Is a pre-grade the same as a grade?

No. A pre-grade is an estimate. PSA and TAG grade the physical card, and only their grade counts.

More guides